Having trouble making ringtones

[kmsgolf]

Hey guys i finally got everything working with my program and my cabel but i tried to put a wav file on my phone and it loads all the way then says connection error, so i tired a ring tone off of here and it worked, im assuming im making it wrong, im using Dbpoweramp and putting everything on the lowest setting, 8 bit 8600hz and mono tone or watever the last one is, what shoudl they be set at, what am i doing wrong?
Ps: i use sound recorder to chop it down to the right length and save as a sound recorded file any help is appreciated

[Pacman11thAve]

8000 hz, 8-bit, mono for WAV ringtones

[kmsgolf]

i tired that but it wont load, does it have to do with me using sound recorder to chop it to the length i want it?

[Pacman11thAve]

1st use Sound Recorder to chop up your ringtone
2nd use Dbpoweramp to convert the ringtone to 8000hz, 8 bit, mono
3rd save it as a WAV file- then load it

[splash70]

I have made a couple ringtones using that method, but they both have a loud hissing sound. Is there something I can adjust to clean the sound up?

[njagz]

Originally Posted by Pacman11thAve

1st use Sound Recorder to chop up your ringtone
2nd use Dbpoweramp to convert the ringtone to 8000hz, 8 bit, mono
3rd save it as a WAV file- then load it

That would be the WRONG way to do it!!!

The way I make all of mine with no problem is this- only need to add one step.

This is personally how I do it and I have no problems ever so do it how you want but this is proven to work.
1. Convert audio file into wav file using dbpoweramp using the before mentioned settings
2. chop your tune to what ever you want
3. save new file as .wav file
4. The most important step - RECONVERT the saved file again using dbpoweramp same settings.-If you forget this step you will never get a home made ringer to work-
5. Load er up!!!!!!

6. DONE!!!!

[pirotesskickass]

Originally Posted by njagz

That would be the WRONG way to do it!!!

The way I make all of mine with no problem is this- only need to add one step.

This is personally how I do it and I have no problems ever so do it how you want but this is proven to work.
1. Convert audio file into wav file using dbpoweramp using the before mentioned settings
2. chop your tune to what ever you want
3. save new file as .wav file
4. The most important step - RECONVERT the saved file again using dbpoweramp same settings.-If you forget this step you will never get a home made ringer to work-
5. Load er up!!!!!!

6. DONE!!!!

I have done everything that I read on this site and all is good until I try to download the ringtone. I have been using Audacity to chop up the song and save to wav file. I followed the prev instructions and all is gravy then it tells me to check my connection and baud rate. I checked everything and its as it should be. Can you help?????

[Caddyman]

as long as the wav file have the proper setting as mentioned b4 and the file name isnt longer than (i think) 10-12 letters including .wav=4 then you should be ok.

[RoBz]

I've tried both webjal and myjal...I'm able to connect to my phone but no luck getting ringtones or wallpaper to my nextel "A general error occured when communicating with phone try changing baud rate to 19200" I did and still nothing Could someone please explain what I need to do to get this right. Thanks I did convert to .wav after cutting using cool edit pro.

[johng126]

Mine dont work either

[nexteli560]

I can load wallpaper but not ringtones I made. I can only get tone from other places to download.

[cforest]

Both of the ways mentioned above are new to me. Thanks for posting them Im interested to try them & see if theyre easier then what I am doing now

[sled_head25]

i wish i could

[ENOEKIM]

if you having problems try www.**********.com there great over there